Trending Courses

Vendors

Skip Navigation Links

Overview

The Implementing and Administering Cisco Solutions (CCNA) v2.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture and hands-on labs, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. This certification & training course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking.
img-course-overview.jpg

What You'll Learn

After taking this course, you should be able to:
  • Identify the components of a computer network and describe their basic characteristics
  • Understand the model of host-to-host communication
  • Describe the features and functions of the Cisco Internet work Operating System (IOS®) software
  • Describe LANs and the role of switches within LANs
  • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
  • Install a switch and perform the initial configuration
  • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
  • Describe the TCP/IP Transport layer and Application layer
  • Explore functions of routing
  • Implement basic configuration on a Cisco router
  • Explain host-to-host communications across switches and routers
  • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
  • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
  • Describe the operation, benefits, and limitations of static routing
  • Describe, implement, and verify virtual local area networks (VLANs) and trunks
  • Describe the application and configuration of inter-VLAN routing
  • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
  • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
  • Configure link aggregation using Ether Channel
  • Describe the purpose of Layer 3 redundancy protocols
  • Describe basic WAN and VPN concepts
  • Describe the operation of access control lists (ACLs) and their applications in the network
  • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure network address translation (NAT) on Cisco routers
  • Describe basic quality of service (QoS) concepts
  • Describe the concepts of wireless networks, which types of wireless networks can be built, and how to use Wireless LAN Controllers (WLCs)
  • Describe network and device architectures and introduce virtualization
  • Introduce the concept of network programmability and Software-Defined Networking (SDN) and describe smart network management solutions such as Cisco DNA Center™, Software-Defined Access (SD-Access), and Software-Defined Wide Area Network (SD-WAN)
  • Configure basic IOS system monitoring tools
  • Describe the management of Cisco devices
  • Describe the current security threat landscape
  • Describe threat defense technologies
  • Implement a basic security configuration of the device management plane
  • Implement basic steps to harden network devices

Who Should Attend

This course is designed for anyone seeking Cisco Certified Network Associate CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks.

The job roles best suited to the material in this course are:

  • Entry-level network engineer
  • Network administrator
  • Network support technician
  • Help desk technician
img-who-should-learn.png

Prerequisites

Before taking this course, you should have:
  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge

Learning Journey

Coming Soon...

Course Outline

  • Exploring the Functions of Networking — Lecture
  • Introducing the Host-to-Host Communications Model — Lecture
  • Operating Cisco IOS Software — Lecture
  • Introducing LANs — Lecture
  • Exploring the TCP/IP Link Layer — Lecture
  • Starting a Switch — Lecture
  • Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets — Lecture
  • Explaining the TCP/IP Transport Layer and Application Layer — Lecture
  • Exploring the Functions of Routing — Lecture
  • Configuring a Cisco Router — Lecture
  • Exploring the Packet Delivery Process — Lecture
  • Troubleshooting a Simple Network — Lecture
  • Introducing Basic IPv6 — Lecture
  • Configuring Static Routing — Lecture
  • Implementing VLANs and Trunks — Lecture
  • Routing Between VLANs — Lecture
  • Introducing OSPF — Lecture
  • Building Redundant Switched Topologies — Self-study
  • Improving Redundant Switched Topologies with EtherChannel — Lecture
  • Exploring Layer 3 Redundancy — Self-study
  • Introducing WAN Technologies — Self-study
  • Explaining Basics of ACL — Lecture
  • Enabling Internet Connectivity — Lecture
  • Introducing QoS — Self-study
  • Explaining Wireless Fundamentals — Self-study
  • Introducing Architectures and Virtualization — Self-study
  • Explaining the Evolution of Intelligent Networks — Lecture
  • Introducing System Monitoring — Lecture
  • Managing Cisco Devices — Lecture
  • Examining the Security Threat Landscape – Self-study

Lab Outline

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLANs and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure Inter-VLAN Routing
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening
  • Log into and Monitor the WLC
  • Configure an Open Wireless Network
  • Define a RADIUS Server and Enable SNMP and Syslog
  • Configure a WLAN to Use WPA2 PSK
CCNA - 200-301

Frequently Asked Questions (FAQs)

  • Why get Cisco certified?

    Cisco certifications validate your expertise in networking and cybersecurity, making you a sought-after professional in the IT industry.

    These globally recognized credentials demonstrate your ability to design, implement, and manage complex networks, enhancing your career prospects and earning potential.

    Cisco-certified professionals are highly valued by employers worldwide for their knowledge and skills in managing critical infrastructure and ensuring secure communications.

  • What to expect for the examination?

    Cisco offers a wide range of certification exams, catering to various levels of expertise and specializations.

    The exams typically consist of multiple-choice questions, simulations, and sometimes lab exercises. Exam formats and content vary depending on the specific certification level and track you choose.

    Note: Certification requirements and policies may be updated by Cisco from time to time. We apologize for any discrepancies; do get in touch with us if you have any questions.

  • How long is Cisco certification valid for?

    Most Cisco certifications are active for three years from the date you earn the certification.

    You can recertify at any time during the active period by re-taking the exam for your existing certification, advancing to the next level of certifications, earning Continuing Education credits, or a combination of both.

    Note: Certification requirements and policies may be updated by Cisco from time to time. We apologize for any discrepancies; do get in touch with us if you have any questions.

  • Why take this course with Trainocate?

    Here’s what sets us apart:

    - Global Reach, Localized Accessibility: Benefit from our geographically diverse training hubs in 16 countries (and counting!).

    - Top-Rated Instructors: Our team of subject matter experts (with high average CSAT and MTM scores) are passionate to help you accelerate your digital transformation.

    - Customized Training Solutions: Choose from on-site, virtual classrooms, or self-paced learning to fit your organization and individual needs.

    - Experiential Learning: Dive into interactive training with our curated lesson plans. Participate in hands-on labs, solve real-world challenges, and take on comprehensive assessments.

    - Learn From The Best: With 30+ authorized training partnerships and countless awards from Microsoft, AWS, Google – you're guaranteed learning from the industry's elite.

    - Your Bridge To Success: We provide up-to-date course materials, helpful exam guides, and dedicated support to validate your expertise and elevate your career.

Keep Exploring

Course Curriculum

Training Schedule

Exam & Certification

Frequently Asked Questions

img-improve-career.jpg

Improve yourself and your career by taking this course.

More Courses By Cisco

Browse All Courses
ucsec-implementing-cisco-unified-communications-security-v1
Collaboration

Implementing Cisco Unified Communications Security v1.0

The course is designed to provide students with the necessary knowledge and skills to implement security features in a Cisco Unified Communications environment.
ILT VILT
Course Duration 5 Days
mpls-implementing-cisco-mpls-v3
Service Provider

Implementing Cisco MPLS v3.0

Learn about VPN technology issues involving MPLS from the service provider perspective & how to configure some of those features and functions in an existing routed environment
ILT VILT
Course Duration 5 Days
mcast-implementing-cisco-multicast-v2
Routing and Switching

Implementing Cisco Multicast v2.0

Learn how to provide technical solutions for simple deployments of IP multicast within a provider or customer network.
ILT VILT
Course Duration 5 Days
img-get-info.jpg

Ready to Take Your Business from Great to Awesome?

Level-up by partnering with Trainocate. Get in touch today.

Name
Email
Phone
I'm inquiring for
Inquiry Details

By providing your contact details, you agree to our Privacy Policy.

Stay Connected. Be the first to Know.

Company

Vendors

Services

Customer Service

© Copyright Trainocate 2024. All rights reserved.