Course Outline
Module 1: Introduction to QoS
- Lesson 1-1: Review
Converged Networks
- Lesson 1-2: Understand QoS
- Lesson 1-3: Describe
Best-Effort and Integrated Services Models
- Lesson 1-4: Describe the
Differentiated Services Model
- Lesson 1-5: Module Summary
- Lesson 1-6: Module
Self-Check
Module 2: Implement and Monitor
QoS
- Lesson 2-1: MQC
Introduction
- Lesson 2-2: Monitor QoS
- Lesson 2-3: Define Campus
AutoQoS
- Lesson 2-4: Define WAN
AutoQoS
- Lesson 2-5: Module Summary
- Lesson 2-6: Module
Self-Check
Module 3: Classification and
Marking
- Lesson 3-1: Classification
and Marking Overview
- Lesson 3-2: MQC for
Classification and Marking
- Lesson 3-3: NBAR for
Classification
- Lesson 3-4: Use of QoS
Preclassify
- Lesson 3-5: Campus Classification
and Marking
- Lesson 3-6: Module Summary
- Lesson 3-7: Module
Self-Check
Module 4: Congestion Management
- Lesson 4-1: Queuing
Introduction
- Lesson 4-2: Configure WFQ
- Lesson 4-3: Configure
CBWFQ and LLQ
- Lesson 4-4: Configure
Campus Congestion Management
- Lesson 4-5: Module Summary
- Lesson 4-6: Module
Self-Check
Module 5: Congestion Avoidance
- Lesson 5-1: Congestion
Avoidance Introduction
- Lesson 5-2: Configure
Class-Based WRED
- Lesson 5-3: Configure ECN
- Lesson 5-4: Describe
Campus-Based Congestion Avoidance
- Lesson 5-5: Module Summary
- Lesson 5-6: Module
Self-Check
Module 6: Traffic Policing and
Shaping
- Lesson 6-1: Traffic
Policing and Shaping Overview
- Lesson 6-2: Configure
Class-Based Policing
- Lesson 6-3: Campus
Policing
- Lesson 6-4: Configure
Class-Based Shaping
- Lesson 6-5: Configure
Class-Based Shaping on Frame Relay Interfaces
- Lesson 6-6: Configure
Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation
- Lesson 6-7: Module Summary
- Lesson 6-8: Module Self-Check
Module 7: Link Efficiency
Mechanisms
- Lesson 7-1: Link
Efficiency Mechanisms Overview
- Lesson 7-2: Configure
Class-Based Header Compression
- Lesson 7-3: Configure LFI
- Lesson 7-4: Module Summary
- Lesson 7-5: Module
Self-Check
Module 8: Deploying End-to-End
QoS
- Lesson 8-1: Apply Best
Practices for QoS Policy Design
- Lesson 8-2: End-to-End QoS
Deployments
- Lesson 8-3: Module Summary
- Lesson 8-4: Module
Self-Check
Lab Details:
1. Case Study 1-1: QoS Mechanisms
- Lab 2-1: IP SLA Setup and
QoS Baseline Measurement
- Lab 2-2: Configuring QoS
with Cisco AutoQoS
2. Case Study 3-1:
Classification and Marking
- Lab 3-2: Classification
and Marking Using MQC
- Lab 3-3: Using NBAR for
Classification
- Lab 3-4: Configuring QoS
Preclassify
- Lab 3-5: Campus
Classification and Marking Using MQC
- Lab 4-1: Configuring Fair
Queuing
- Lab 4-2: Configuring
LLQ-CBWFQ
- Lab 4-3: Configuring
Campus-Based Queuing Mechanisms
3. Case Study 5-1: WRED Traffic
Profiles
- Lab 5-2: Configuring
DSCP-Based WRED
- Lab 5-3: Configuring WTD
Thresholds
- Lab 6-1: Configuring
Class-Based Policing
- Lab 6-2: Configuring
Class-Based Shaping
- Lab 7-1: Configuring
Class-Based Header Compression
- Lab 7-2: Configuring LFI
- Lab 8-1: Mapping
Enterprise QoS Policy to the Service Provider Policy