Download PDF
of this course

Cisco ONS 15454 Carrier Packet Transport Release 9.5.12 Version 1 ()

  • Overview
  • Who Should Attend
  • Certifications
  • Prerequisites
  • Objectives
  • Content
  • Schedule
Course Overview

Course Duration: 
Cisco ONS 15454 Carrier Packet Transport Release 9.5.12 Version 1 - This lab-intensive course introduces you to the Cisco Carrier Packet Transport (CPT) network. You will learn about the M6 and M2 shelf-hardware installation, power connections, and network connection. You will also learn about the CPT 600, CPT 200, and CPT 50 Satellite. The course covers the four kinds of Ethernet virtual circuits (EVCs): Ethernet private line, Ethernet virtual private line, Ethernet private LAN, and Ethernet virtual private LAN. There is a section about installing connections to an external router network and how to configure EVCs to it. You will learn how to set up the network for Multiprotocol Label Switching (MPLS) Transport Protocol (TP) and install MPLS-TP tunnels, Ethernet pseudowires and virtual private LAN services (VPLS), which are multipoint pseudowire.

Who Should Attend

  • Technical professionals who are responsible for installation, deployment, and maintenance of the Cisco 15454 CPT network
  • Network operations, planners, and designers

Course Certifications

This course is part of the following Certifications:

Prerequisites

  • Familiarity with the Cisco ONS 15454 family
  • Knowledge of packet switching
  • Knowledge of Ethernet basics

Course Objectives

  • Connect and configure a Cisco ONS 15454 M6 chassis
  • Install the fanout group connection to the CPT 50 Satellite
  • Install provisionable patch cords between CPT600/200 nodes
  • Configure generic communication channel (GCC) between nodes
  • Create EVCs
  • Install node settings for MPLS-TP
  • Create MPLS-TP tunnels and Ethernet pseudowires
  • Install and test quality of service in the CPT network
  • Create VPLS circuits
  • Install interfaces to external router network
  • Install SyncE in the CPT network
  • Configure T1 circuits using EVC and pseudowire
  • Install integrated DWDM and create satellite links over DWDM network
  • Examine license information in the CPT-50 Satellite
  • Troubleshoot the CPT network

Course Content

  • CPT Hardware Fundamentals
  • CPT Software Fundamentals
  • Network Configuration Spans, PPCs and GCCs
  • Configuration for EVCs
  • Configuration for MPLS-TP
  • Installing MPLS-TP Tunnels and Pseudowires
  • Quality of Service for CPT
  • CPT Virtual Private LAN Service
  • CPT Router Interface
  • SyncE and Constant Bit-Rate Circuits
  • Embedded Dense Wavelength Division Multiplexing
  • Verifying Satellite License Information
  • Operations Administration and Maintenance
  • CPT Troubleshooting

Course ID:


Show Schedule for 1 Month  3 Months  All 
Date Country Location Register